Home»Product Details

TF-M-PT100-VAL Temperature Sensor
TF-M-PT100-VAL Temperature Sensor

TF-M-PT100-VAL Temperature sensor for Hydraulic and Lubrication Oil applications. Cost effective series available in different materials to suit application.

/ quantity

To find out prices for this product please call us or use our online enquiry system. If you send an online enquiry the Application Description is important to us in order to identify the best solution available - so please give us as much technical information as you can. Don't forget to enter your quantity, then just click on 'add to my enquiries'.
Documents
document size
de110004m TF-M-PT100-VAL Temperature Sensor.pdf
TF-M-PT100-VAL Temperature sensor for Hydraulic and Lubrication Oil applications. Cost effective series available in different materials to suit application.

download
Details
  • The reliable monitoring of bearing temperatures demands a temperature sensor with special construction features. These special requirements concern the temperature transition point from the bearing housing to the temperature sensor. Due to the materials and the shape of the bearing housing it may be that the temperature sensor loses contact with the bearing surface because of thermal expansion. The resulting air gap invalidates the system output. The TF-M-PT100 VAL sensor is constructed in such way that the temperature sensor is pressed with a low initial force onto the surface so that an eventual deviation of the dimension due to heat expansion is axially compensated. A PT100 is used as the sensor. This is a resistor whose value changes proportionally to the temperature, producing a continuous signal. The unit consists of two modules which can be separated from each other. The "wet" part remains in the reservoir whereas the "dry" part can be inspected if necessary, thus eliminating the need to drain the reservoir for maintenance. The switch is fitted with an elastomer seal.
Technical features
  • 12mm variable adaptation with 25 Nm starting torque of the tube
  • easy to install
  • electrical inner-part easy to remove
  • with DIN connector (allows adjustment of cable orientation in 90° steps)
  • elastomer seal fitted as standard
enquiry list
contains: 0 products
 
enquiries
free friendly advice

HOTLINE:
01564 825 145

Email:
please click here

enquiry form:
please click here

email:
please click here