Home»Product Details

Multitronic Display and Control Unit with easyMont
Multitronic Display and Control Unit with easyMont

The Buehler Multitronic Display and Control Unit with easyMont displays the working measurements (including pressure, level and temperature) in hydraulic, lubricant and coolant systems

/ quantity

To find out prices for this product please call us or use our online enquiry system. If you send an online enquiry the Application Description is important to us in order to identify the best solution available - so please give us as much technical information as you can. Don't forget to enter your quantity, then just click on 'add to my enquiries'.
Documents
document size
DE180201_Pressotronik.pdf
Datasheet for the Multitronic Display and Control Unit with easyMont

download
Details
  • Multitronic Display and Control Unit with easyMont displays the system temperature, pressure or liquid level at a good visible location independent of the location of the measuring point.
  • Complex Hydraulic or lubrication systems often require a number of measuring points for pressure, temperature or liquid level. Since these points are scattered all over the system the centralised location of the displays with good visibility and accessibility becomes an important requirement for convenient system operation.
  • The Buehler Multitronic display and control unit displays the current system temperature, pressure or liquid level at a good visible location independent of the location of the measuring point. A standard analogue input signal 4-20mA can be converted into different display values corresponding to the required measuring unit.
  • The Multitronic is wall mounted on a standard rail.
  • Depending on the applications requirements, using a menu guided programme up to two individual output signals can be programmed in addition to the 4-20 mA output signal. The bright LED display can be set to measure in °C, °F, bar, psi or litre.
  • All settings are stored even if power failure occurs. The maximum and minimum values are available during the operation.
Technical features
Features of Display
• Up to 4 programmable pressure switching points
• 1 programmable switching point + analogue output
• Analogue output progr. as 0-10V, 2-10V or 4-20mA
• Coding accord. to VDMA standard 24574-1
• Display rotatable through 270°
• Min. and max. value memory
• Diagnosis function
• Window function
• Rail mounting
• No piping necessary
• Universally useable
• 4-20mA input
• Useable for NT63, NV73, Thermolog MKII…
• The same programming language always
enquiry list
contains: 0 products
 
enquiries
free friendly advice

HOTLINE:
01564 825 145

Email:
please click here

enquiry form:
please click here

email:
please click here