Home»Product Details

Moisture Detector
Moisture Detector

Moisture Detector for Vehicle Emissions Testing Systems and a wide range of other gas sample monitoring applications.
Moisture detectors are used to trigger an alarm when a damaging moisture threshold is reached in gas conditioning systems.

/ quantity

To find out prices for this product please call us or use our online enquiry system. If you send an online enquiry the Application Description is important to us in order to identify the best solution available - so please give us as much technical information as you can. Don't forget to enter your quantity, then just click on 'add to my enquiries'.
Documents
document size
Datasheet Moisture Detector 1427 kb
Details
  • These detectors are placed into the gas stream and react to low moisture content and do not require the presence of condensate droplets. After the high moisture is removed, the detectors are dried by the gas stream and are self-resetting and maintenance-free. The detectors can be used with the AGF-filters or with adapters type G or S. All models provide automatic broken wire detection.
  • Moisture Detector Controllers
  • Model ER-145/A/Ex with intrinsically safe input and long cables. One FF-Au can be connected. Moisture detection or a broken wire are shown by LED indicatars.
  • Model FF-19 for 19"-support. Same specifications as Model FF-HM below.
  • Model FF-HM for rail mounting: - Connection of up to two Model FF-Au moisture detectors in parallel or one detector Model FF-Au or FF-40. - Potential-free outputs for moisture detection and broken wire in fail-safe mode. - LED’s for power, moisture and broken wire. - Configurable lock mode: detection may be locked or mono-stable. The reset in the locked mode may be operated by the switch or external input.
  • Models FF-x-U for wall mounting: - These models have mono-stable outputs. Power, moisture detection and broken wire are shown by LED’s. - FF-1-U: For connection of one or two FF-Au units. The controller has two summarized outputs. - FF-3-U: For connection of one FF-Au or FF-40. One summarized output for moisture and broken wire, one output for broken wire. - FF-3-U-2: For connection of two FF-3-U units in one housing.
Technical Features
  • Pressure rating up to 40 bar
  • Version with broken wire detection
  • Controllers for wall mounting, railmounting and for 19" support
  • Extremely fast indication of water
  • Intrinsically safe version available
  • High sensitivity
enquiry list
contains: 0 products
 
enquiries
free friendly advice

HOTLINE:
01564 825 145

Email:
please click here

enquiry form:
please click here

email:
please click here